H8-A brown coal boiler
The automatic coal boiler is exactly for those, who seek a combination of the most modern methods and conventional fuel.
Easy Operation
- The container lasts up to 3 days in winter without the need to refill fuel
- It can also be set to self-regulation based on the outdoor temperature, so it balances the temperature differences
- You can add GSM and an Internet module for control via a mobile phone or PC
Economic operation
- Efficiency up to 92.8 %
- Low fuel and electricity consumption
- Belongs to emission class 4 and 5 and meets ecodesign conditions
Small size
- It’s also suitable for small boiler rooms with low ceilings
- Boilers with an output of 15 kW and 24 kW can also fit through a 60 cm width
- The burner can be placed from the right or left side
Automatic boilers long service life
- Cast iron retort burner
- Warranty 5 years
- Double protection against fuel burnout and automatic boiler overheating
| Boiler type | H815‑A | H824‑A | H835‑A | H845‑A | |
|---|---|---|---|---|---|
| Nominal thermal output | kW | 15 | 24 | 35 | 45 |
| Measured minimal output | kW | 4,4 | 7 | 10 | 13 |
| Efficiency | % | 92,8 | 93 | 93,6 | |
| Boiler class according to EN 303 – 5:2013 | 4 | 4 | 4 | 5 | |
| Prescribed fuel | Brown coal nut 2 | ||||
| Flue gas temperature | [°C] | 89,5 | 106 | 105 | 89 |
| Fuel consumption | [kg/h] | 0,793 – 2,999 | 1,361 – 4,67 | 2,06 – 6,963 | 2,595 – 8,953 |
| Maximum heated water service temperature | [°C] | 80 | |||
| Minimum heated water temperature | [°C] | 70 | |||
| Minimum return water temperature | [°C] | 65 | |||
| Required chimney draught | [Pa] | 16 | 19 | 20 | 20 |
| Maximum water service pressure | [Ba] | 2 | |||
| Minimum water service pressure | [Ba] | 1,5 | |||
| Maximum water test pressure | [Ba] | 4 | |||
| Connecting voltage | [V/Hz] | 230/50 | |||
| Water volume | [l] | 31 | 39 | 63 | 81 |
| Electricity consumption nominal output/min. output | [W] | 54/22 | 73/27 | 131/44 | 131/44 |
| Electrical protection | IP 20 | ||||
| Boiler body wall thickness (water/flame) | [mm] | 5 | |||
| Boiler body wall thickness (water) | [mm] | 3 | |||
| Hopper capacity | [l] | 203 | 245 | 360 | 573 |
| Boiler weight | [kg] | 223 | 275 | 363 | 510 |
| Dimensions | |||||
| A Boiler height | mm | 969 | 969 | 1264 | 1553 |
| B Boiler width | mm | 454 | 514 | 565 | 565 |
| C Set depth (setting system behind the hopper) | mm | 846,5 | 931 | ||
| Set depth=boiler (setting system under the hopper) | mm | 821,5 | 901,5 | 1002 | |
| D Fume duct location from the ground to the centre of the outlet | mm | 687,5 | 687,5 | 983,5 | 1160 |
| E Inlet water funnel location from the ground to the centre of the outlet | mm | 134,5 | |||
| F Outlet water funnel location from the ground to the centre of the outlet | mm | 825 | 825 | 1120 | 1322 |
| H Boiler width with hopper | mm | 1063 | 1119 | 1517 | 1517 |
| I Boiler hopper height | mm | 1200 | 1215 | 1365 | 1610 |
| Hopper height (with lid open/with half-open lid) | mm | 1671/1519 | 1843/1671 | 1748/1912 | 1872 |
| Funnel type: Output / Inlet (inner thread) | [Js] | G1 1/4″ | |||
| Connection for draining and filling (inner thread) | [Js] | G 1/2″ | |||
| Flue pipe diameter | mm | 150 | 150 | 150 | 198 |
Product informations
Technical documentation
Accessories